HP JetDirect 300X - FTP Printing with HP JetDirect; FTP Printing Requirements

EN
75
5
FTP Printing
Introduction
FTP (File Transfer Protocol) is a basic TCP/IP connectivity utility
to transfer data between systems. FTP printing is a way to use FTP
to send print files from a client system to an HP JetDirect-connected
printer. In an FTP printing session, the client connects and sends
a print file to the HP JetDirect FTP server which in turn passes the
print file to the printer.
The HP JetDirect FTP server can be enabled or disabled through a
configuration utility, such as Telnet.
Requirements
FTP printing requires the following:
●
HP JetDirect print servers with firmware version x.08.03 or
later.
●
TCP/IP client systems with FTP that complies with RFC 959.
Note For the most recent list of tested systems, visit the
HP Customer Care Online at
www.hp.com/support/net_printing.