78 FTP Printing
EN
If the connection is successful, the HP JetDirect model and
firmware version will be displayed.
After a successful connection, the user is prompted for a login name
and password. The default is the client’s login name. The JetDirect
FTP server will allow any user name. Passwords are ignored.
If login is successful, a message “230” will be displayed on the client
system. In addition, the available HP JetDirect ports for printing
will be displayed. HP JetDirect external print servers with multiple
ports will display all available ports, with Port1 the default port. To
change ports, use the FTP
cd
(change directory) command. For an
example of a successful login, see “Example of an FTP Session.”
Ending the FTP Session
To end an FTP session, type
quit
or
bye
.
Commands
Table 5.1 summarizes commands available to the user during an
FTP printing session.
To Next Page
Loading...
