HP JetDirect 600N - Page 9

9
Table of Contents
Quick Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1. Introduction
Supported Network Protocols . . . . . . . . . . . . . . . . . . . 1-12
Supported Printers . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-13
2. Installing the Print Server
What You Need for Installation . . . . . . . . . . . . . . . . . 2-15
Step 1. Identify Your HP JetDirect 600N Internal
Print Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16
Step 2. If Necessary, Set Switches or Jumpers
on Your Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18
Step 3. Before Installing the Card, Verify That Your
Printer Works . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19
Step 4. Turn Off Your Printer and Insert the Card . . 2-21
Step 5. Verify That the Card Was Installed
Correctly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-22
Step 6. Configure the Card for Network Operation. . 2-24
3. Control Panel Configuration
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-27
To Restore Configuration Default Values . . . . . . . . . 3-28
To Enable or Disable Network Protocols . . . . . . . . . . 3-28
To enable or disable network protocols . . . . . 3-29
Configuring IPX Frame Types . . . . . . . . . . . . . . . . . . 3-30
IPX Frame Types on an HP JetDirect
Ethernet Card . . . . . . . . . . . . . . . . . . . . . 3-30
IPX Frame Types on an HP JetDirect
Token Ring Card . . . . . . . . . . . . . . . . . . . 3-30
To configure an IPX frame type . . . . . . . . . . . 3-31