108 FTP Printing EN
ascii
Configures an FTP ASCII file transfer. HP Jetdirect print
servers support only non-print format control for character
transfers (standard values for spacing and margins are
used).
[Ctrl-C]
Press the
[Ctrl]
and
[C]
keyboard keys simultaneously to
abort the FTP service command and any transfer of data.
The data connection is closed.
rhelp
remotehelp
This command depends on your client system (use rhelp
on UNIX, or remotehelp on Windows NT/2000) and
displays a list of FTP system commands supported by the
print server. (Note: the commands displayed are not user
commands. User-accessible commands depend on the
client’s FTP system.)
Table 5.1 User Commands for HP Jetdirect FTP Server (2 of 2)
Command Description
To Next Page
Loading...
