HP Jetdirect 610N - Page 172

172 Using the Embedded Web Server EN
Operating Notes
●
If you enter or change a configuration parameter value, click
Apply to enable your change, or click Cancel to erase your
change.
● Changes to the IP address will close the connection to the
embedded web server. To re-establish a connection, use the new
IP address.
CAUTION Changes to the IP address on the HP Jetdirect print
server will result in printing failures for clients that
have been configured to print through this print
server.
● Novell NetWare networks: The embedded web server supports
configuration parameters for Queue Server Mode under NDS
(Novell Directory Services) only. NetWare Bindery and RPrinter
Mode configuration are not supported. To access NetWare
configuration parameters, click the IPX/SPX button on the
Networking page.
Note For a Novell NetWare network, you cannot create
the NDS print server, printer, and queue objects
using the embedded web server. To create these
objects, use other available tools or utilities.