HP Jetdirect 610N - Page 182

182 Using the Embedded Web Server EN
Select Language
This link appears if the HP Jetdirect web pages support multiple
languages. Supported languages may also be selected through
language preference settings in your browser (see your browser’s
Help).
Support Info
Use this page to configure links for Support assistance. You can
designate a Support person and phone number of an administrator
for this device, as well as URL addresses for web-based product and
technical support.
USB Settings
If the HP Jetdirect print server provides a USB connection to the
network device (such as a USB printer), a link to USB configuration
parameters will be displayed.
Table B.4 SNMP Settings
Item Description
Set Community
Name
An SNMP Set Community Name is a password to be able
to configure (or “write” to) SNMP control functions on the
HP Jetdirect print server. An incoming SNMP SetRequest
must contain a community name that matches the one
stored on the print server before the print server will
respond. The community name must be ASCII characters
and can be up to 255 characters long. The default
community name is 'public'.
Get Community
Name
An SNMP Get Community Name is a password that allows
“read” access to SNMP information on the HP Jetdirect
print server. The community name must be ASCII
characters and can be up to 255 characters long. The
default community name is 'public'.