EN Using the Embedded Web Server 185
To clear all entries in the host access list, enable the “Clear Allow
Table” checkbox and click Apply.
To add an entry into the host access list, use the “IP address” and
“Mask” fields to specify a host, then click Apply.
Network Statistics
This page is used to display counter values and other status
information currently stored on the HP Jetdirect print server. This
information is often useful to diagnose performance and operational
problems associated with the network or network device.
Protocol Info
This page provides a list of various network configuration settings
on the HP Jetdirect print server for each protocol. Use these lists to
validate your desired settings.
Test P a g e
This page provides a view of the HP Jetdirect Configuration Page
that contains a summary of HP Jetdirect status and configuration
information. The contents of this page are described in Chapter 8
.
Refresh Rate
The refresh rate is the time period (in seconds) that the diagnostic
pages will be automatically updated. The value '0' disables the
refresh rate.
To Next Page
Loading...
