EN TCP/IP Configuration 35
●
By browsing to the embedded Web server on the HP Jetdirect
print server and setting the configuration parameters. For
more information, see “Using the Embedded Web Server
” and
Appendix B
.
●
By manually entering the configuration data using the printer
control panel keys. The control panel method allows you to
configure only a limited subset of configuration parameters
(IP address, subnet mask, default gateway address, and
idle timeout). Therefore, control panel configuration is
recommended only during troubleshooting or for simple
installations. If control panel configuration is used, the print
server saves the configuration over power cycles. For more
information, see “Using the Printer Control Panel
”.
To Next Page
Loading...
