EN TCP/IP Configuration 61
Note If you choose to return to a DHCP configuration,
the print server assumes it should acquire its
configuration information from a DHCP server.
This means that when choose DHCP and complete
your configuration session (using Telnet, for
example), the TCP/IP protocol for the print server
is re-initialized and all current configuration
information is deleted. The print server then
attempts to acquire new configuration information
by sending DHCP requests on the network to a
DHCP server.
For DHCP configuration via Telnet, refer to “Using Telnet” in
this chapter.
To Next Page
Loading...
