HP Jetdirect 610N - Configuring for LPD Printing; Introduction

EN 85
4
Configuring for LPD Printing
Introduction
The HP Jetdirect print server contains an LPD (Line Printer
Daemon) Server module to support LPD printing. This chapter
describes how to configure the HP Jetdirect print server for use
with various systems that support LPD printing. These
instructions include:
● LPD on UNIX Systems
■ Configuring BSD-based UNIX systems using LPD
■
Configuring print queues using the SAM utility (HP-UX
systems)
●
LPD on Windows NT/2000 Systems
●
LPD on Mac OS Systems
Note Recent versions of Novell NetWare (NetWare 5.x
with NDPS 2.1 or greater) support LPD printing.
For setup instructions and support, refer to the
documentation supplied with NetWare. Also, refer
to the Technical Information Documentation (TID)
on Novell’s support website.