HP L1755 - Selecting the Signal Connectors and Cables; Connecting the Monitor

Setting Up the Monitor
Selecting the Signal Connectors and Cables
There are two signal input connectors:
■ VGA connector
■ DVI-I connector (available on select models)
The monitor will automatically determine which inputs have
valid video signals. The inputs can be selected through the
On-Screen Display (OSD) feature or by pressing the – button (to
enable DVI signal input) or the
+ button (to enable VGA signal
input) on the monitor front bezel.
The video mode supported by the DVI-I connector is determined
by the video cable used. For digital operation, use the DVI-D
signal cable provided. For analog operation, use the VGA signal
cable or VGA to DVI-I signal cable provided.
Connecting the Monitor
1. Place the monitor in a convenient, well-ventilated location
near your computer.
3–4 User Guide