Mechanical
MechanicalMechanical
Mechanical
Dimensions
Dimensions Dimensions
Dimensions
(H x W x D)
Packaged:
Packaged:Packaged:
Packaged:
7.8 x 6.25 x 1.5 in (19.8 x 15.9 x 3.8 cm)
Unpackaged:
Unpackaged:Unpackaged:
Unpackaged:
6.3 x 5.2 x 0.65 in (16 x 13.2 x 1.65 cm)
Weight
WeightWeight
Weight
Packaged:
Packaged:Packaged:
Packaged:
1.1 lb (0.49 kg)
Unpackaged:
Unpackaged:Unpackaged:
Unpackaged:
0.82 lb (0.37 kg)
Additional components
Additional componentsAdditional components
Additional components
Eight 10 mm mounting screws (for attachment to VESA compliant monitor mounts)
Eight 15.5 mm mounting screws (for attachment to HP Compaq t5000 Thin Client products)
Four 20 mm mounting screws (for attachment to back of select HP flat panel monitor stands)
One Quick Release "locking" screw
Color
ColorColor
Color
Carbonite
NOTE:
NOTE: NOTE:
NOTE:
No HP monitors allow positioning of a thin client product between a monitor screen and its stand.
NOTE:
NOTE: NOTE:
NOTE:
The Quick Release device is not to be used between a monitor screen and its stand unless provided that way from the
factory.
NOTE:
NOTE: NOTE:
NOTE:
Under no circumstances is the Quick Release device intended to be used in an orientation where the Release/Lock lever is
oriented downward.
Supported weight
Supported weightSupported weight
Supported weight
capacity
capacitycapacity
capacity
The HP LCD Monitor Quick Release has been designed to support a maximum of up to 24 lbs (10.9 kg)
depending upon the mounting configuration used. Please note this is a total weight limit for all devices
mounted, i.e. the combined weight of the monitor and a second device such as an HP Thin Client
cannot exceed 24 pounds. Because mounting surfaces vary widely and the final mounting method and
configuration may vary, mounting fasteners are not supplied (other than the VESA-compliant screws). HP
recommends that you consult with a qualified engineering, architectural or construction professional to
determine the appropriate type and quantity of mounting fasteners required for your application and to
ensure that your mounting solution is properly installed to support applied loads.
© Copyright 2008 Hewlett-Packard Development Company, L.P.
Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the U.S. and other countries. Windows
Vista is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. ENERGY
STAR is a registered mark owned by the U.S. government.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
QuickSpecs
HP L1908wi 19-inch Widescreen LCD Monitor with IWC
HP L1908wi 19-inch Widescreen LCD Monitor with IWCHP L1908wi 19-inch Widescreen LCD Monitor with IWC
HP L1908wi 19-inch Widescreen LCD Monitor with IWC
Stand
StandStand
Stand
Technical Specifications - HP Flat Panel Monitor Quick Release
DA - 12813 North America — Version 9 — December 12, 2008
Page 11
To Previous Page
Loading...
Need help?
General
