Control panel message Event
log error
message
Description Recommended action
ORDER FUSER KIT
XXXX PAGES LEFT
For menus press
None The fuser is near end of life.
The printer is ready and will
continue for the estimated number
of pages indicated.
1. Order the image fuser kit.
2. Printing can continue until the
fuser reaches end of life.
3.
Press
for detailed
information.
4. Press
and to step
through instructions.
5. Supplies ordering information
is also available from the
embedded Web server.
ORDER FUSER KIT
XXXX PAGES LEFT
To continue press
None The fuser is near end of life and
the SUPPLIES LOW setting in the
SYSTEM SETUP submenu is set
to STOP.
1. Order the image fuser kit.
2. Press
to continue printing.
Printing can continue until the
fuser reaches end of life.
3. Supplies ordering information
is also available from the
embedded Web server.
ORDER SUPPLIES
For menus press
None More than one supply item is low. 1. Press to identify which
supplies should be ordered.
2. Order the identified supplies.
3. Printing can continue until
supplies reach end of life.
4.
Press
for detailed
information.
5. Press
and to step
through instructions.
6. Supplies ordering information
is also available from the
embedded Web server.
ORDER SUPPLIES
For status press
None More than one supply item is low
and the SUPPLIES LOW setting is
set to STOP.
1. Press to identify which
supplies should be ordered.
2. Order the identified supplies.
3. Press
twice to continue
printing. Printing can continue
until supplies reach end of life.
4. Supplies ordering information
is also available from the
embedded Web server.
Table 7-2. Alphabetical printer messages (HP Color LaserJet 5500 models) (continued)
274 Chapter 7 Troubleshooting ENWW
To Next Page
Loading...