Safety information
Laser safety statement
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug
Administration has implemented regulations for laser products manufactured since 1 August
1976. Compliance is mandatory for products marketed in the United States. The printer is
certified as a “Class 1” laser product under the U.S. Department of Health and Human
Services (DHHS) Radiation Performance Standard according to the Radiation Control for
Health and Safety Act of 1968. Since radiation emitted inside the printer is completely
confined within protective housings and external covers, the laser beam cannot escape
during any phase of normal user operation. Invisible laser beam is emitted within the laser/
scanner unit. Do not disassemble the laser/scanner unit, as the laser beam can injure your
eyes.The unit cannot be adjusted in the field. The label shown below is attached to the laser/
scanner unit cover.
WARNING!
Using controls, making adjustments, or performing procedures other than those specified in
this guide may result in exposure to hazardous radiation.
Canadian DOC regulations
Complies with Canadian EMC Class B requirements.
«Conforme á la classe B des normes canadiennes de compatibilité électromagnétiques.
«CEM».»»
EMI statement (Korea)
Figure 1-7. EMI statement for Korea
32 Chapter 1 Printer description ENWW
To Next Page
Loading...