Space requirements
The printer must have the following amounts of space above and around it.
Figure 3-1.
Space requirements (printer only)
1 628 mm (25 inches)
2 1090 mm (43 inches)
3 940 mm (37 inches)
500-sheet paper feeder dimensions
For each additional 500-sheet paper feeder installed, add the height from the list below to
the height of the printer.
● Width = 578 mm (22.8 inches)
● Depth = 662 mm (26.2 inches)
● Height = 132 mm (5.2 inches)
Printer stand dimensions
If the printer is on a stand, add the height from the list below to the total height. Also note
that the stand increases the overall width space requirement.
HP Color LaserJet 5500 models only
● Width = 630 mm (24.8 inches)
● Depth = 670 mm (26.5 inches)
● Height = 202 mm (8.0 inches)
HP Color LaserJet 5550 models only
● Width = 628.7 mm (24.7 inches)
● Depth = 727 mm (28.6 inches)
● Height = 130.2 mm (4.1 inches)
48 Chapter 3 Installation and configuration ENWW
To Next Page
Loading...