8. Grasp both sides of the cartridge and distribute the toner by gently rocking the cartridge
from side to side.
9. Remove the orange shipping tape. Remove and discard the orange shipping locks.
10. Remove the inside sealing tape by pulling the orange loop on the end of the cartridge
and pulling the tape completely out. Discard tape.
Installing paper trays (HP Color LaserJet 5500 series printers)
1. Adjust the rear length guide by squeezing the guide adjustment latch and sliding the
back of the tray to the size of the paper being loaded.
60 Chapter 3 Installation and configuration ENWW
To Next Page
Loading...