8. Insert the CD ROM into the proper drive to install the software.
9. Press M
ENU
to open the MENUS'.
10. Press
to highlight CONFIGURE DEVICE.
11. Press
to select CONFIGURE DEVICE.
12. Press
to highlight SYSTEM SETUP.
13. Press
to select SYSTEM SETUP.
14. Press
to highlight LANGUAGE.
15. Press
to select LANGUAGE.
16. Press
to highlight the desired language, and then press to select and save the
language choice.
Testing the printer operation
Print a configuration page to ensure the printer is working properly.
1. Press
(HP Color LaserJet 5500 models) or M
ENU
(HP Color LaserJet 5550 models) to
enter the MENUS.
2. Press
to highlight INFORMATION.
3. Press
to select INFORMATION.
4. Press
to highlight PRINT CONFIGURATION.
5. Press
to print the configuration page.
Using PowerSave
The adjustable PowerSave Time feature reduces power consumption when the printer has
been inactive for an extended period. You can set the length of time before the printer goes
into PowerSave mode to 1 MINUTE, 15 MINUTES, 30 MINUTES, or to 1 HOUR, 2 HOURS,
or 4 HOURS. The default setting is 30 MINUTES.
Note
The printer display dims when the printer is in PowerSave mode. PowerSave mode does not
affect printer warm-up time.
ENWW Installing print cartridges for HP Color LaserJet 5500 series printers 69
To Next Page
Loading...