USB configuration (HP Color LaserJet 5550 models)
This printer supports a USB 1.1 connection. The port is located on the back of the printer, as
shown in
Figure 3-6. USB connection. You must use an A-to-B type USB cable.
The network USB can be used at the same time.
Note
USB support is not available for computers running Windows 95 or Windows NT 4.0. You
cannot use the parallel connection and the USB connection at the same time.
Figure 3-6.
USB connection
1 USB connector
2 USB port
Auxiliary connection configuration (HP Color LaserJet 5550
models)
This printer supports an auxiliary connection for paper handling input devices. The port is
located on the back of the printer, as shown in the auxiliary connection.
Figure 3-7. Auxiliary connection
1 Auxiliary connection port
Network connections
You may connect the printer to a network in several ways.
72 Chapter 3 Installation and configuration ENWW
To Next Page
Loading...