94 Chapter 4 - Parts and diagrams Q1342-90901
How to use the parts lists and diagrams
The figures in this chapter show the major subassemblies in the
printer and their component parts. A part number table follows each
exploded assembly illustration. Each table lists the reference
designator, the associated part number for the item, and a description
of the part.
Parts that have no reference designator or part number are not field-
replaceable units and cannot be ordered.
While looking for a part number, pay careful attention to the voltage
listed in the description column to make sure that the part number
selected is for the correct printer model.
Common hardware
The printer has three common fasteners. See table 18 for a
description of these screw types.
Hint The left-cover retaining screw is slightly longer than similar screws
used in the printer. Keep this screw separated from other screws while
servicing the printer to avoid misplacing it. Order part number
RY7-5082-000CN for a screw kit containing a complete set of screws
for the HP LaserJet 1000 and 1200 series printers.
Table 18. Common fasteners
Example Description
Screw, machine, truss head
Screw, star
Screw, self-tapping
To Next Page
Loading...