Need help?Do you have a question about the HP LaserJet 1022 and is the answer not in the manual?
General| Print Technology | Laser |
|---|---|
| Print Speed | Up to 19 ppm |
| Monthly Duty Cycle | Up to 8, 000 pages |
| Connectivity | USB 2.0 |
| Memory | 8 MB |
| Processor Speed | 266 MHz |
| Dimensions | 370 x 242 x 209 mm |
| First Page Out | 8.5 seconds |
| Duplex Printing | Manual |
| Operating System Compatibility | Windows, Mac OS, Linux |
| Print Resolution | Up to 1200 x 1200 dpi |
| Input Capacity | 150 sheets |
| Output Capacity | 100 sheets |
| Media Sizes Supported | Letter, Legal, Executive, Postcard |
| Media Types Supported | Plain, envelopes, labels, transparencies, cardstock |
| Print Margins | 0.16 in (4 mm) (top, bottom, left, right) |
Details the various models in the HP LaserJet 1022 series printers and their features.
Identifies the main physical components of the HP LaserJet 1022 series printers.
Explains the location and contents of the model and serial number label.
Highlights key hardware features like ProRes technology, print speed, and memory.
Lists the features included in the printer's firmware.
Provides detailed physical, performance, and environmental specifications for the printers.
Details power requirements, consumption, and ratings for the printers.
Specifies the sound power and pressure levels during operation.
Information regarding HP Care Pack for additional coverage and services.
Describes the print cartridge, its life, and notes on refilled cartridges.
Details HP's program for recycling used print cartridges.
Covers FCC compliance, Canadian DOC regulations, and Korean EMI statement.
Provides safety information related to laser radiation for Finland.
Specifies recommended temperature, humidity, and space for printer operation.
Explains the printer's buttons, lights, and their functions.
Details supported media sizes and types, and cautions about non-conforming media.
Provides advice on using paper, transparencies, labels, and envelopes.
Specific guidelines and specifications for using card stock.
Instructions on how to load various types of media into the printer.
Procedure to select the correct media type via printer software settings.
Provides estimated lifespans for replaceable parts like rollers and fuser.
General instructions for cleaning the printer's exterior and interior.
Procedure to clean dust and toner from the paper path using a special mode.
Instructions for cleaning the area where the print cartridge is located.
Steps to clean the pickup roller to resolve feeding issues.
Overview of parts that can be replaced by the user.
Detailed steps for replacing the pickup roller.
Detailed steps for replacing the separation pad.
Instructions for replacing the main input tray assembly.
Instructions for replacing the output bin extension.
Information on paper jams, causes, and clearing procedures.
Step-by-step guide for safely removing jammed paper.
Outlines the major systems comprising the printer's operation.
Details the formatter's role, CPU, RAM, and USB interface.
Explains how MEt enhances printer memory performance.
Describes the Enhanced I/O feature for faster data transfer.
Divides printer functions into five main groups.
Details the ECU and power assembly's role in controlling the printer.
Explains the function of the laser/scanner assembly.
Describes AC, DC, and high-voltage power distribution circuits.
Explains the technologies involved in creating a printed image.
Details each of the seven stages in the image formation process.
Describes the print cartridge's role and internal components.
Details the process of moving paper through the printer.
Explains how the printer detects various types of paper jams.
Identifies the locations and functions of key electromechanical components.
Describes the step-by-step operation sequence during printing.
A diagram illustrating the timing of printer operations for an A4 page.
General guidelines, warnings, and precautions for servicing the printer.
Lists the necessary tools for performing removal and replacement procedures.
Pre-service checks and preparations required before disassembling the printer.
Instructions for removing the print cartridge.
A flowchart illustrating the recommended order for removing printer parts.
An introduction to parts that can be replaced by the user.
Step-by-step instructions for replacing the pickup roller.
Step-by-step instructions for replacing the separation pad.
Instructions for removing and replacing the main input tray assembly.
Instructions for removing and replacing the output bin extension.
General instructions for removing external covers.
Step-by-step guide to removing the right-side cover.
Step-by-step guide to removing the left-side cover.
Instructions for removing the rear panel and top-cover assembly.
Step-by-step instructions for removing the front cover.
Guidance for replacing internal components.
Step-by-step instructions for removing the transfer roller assembly.
Step-by-step instructions for removing the engine-power assembly.
Step-by-step instructions for removing the fuser assembly.
Step-by-step instructions for removing the paper-pickup assembly.
Step-by-step instructions for removing the ECU assembly.
Step-by-step instructions for removing the laser/scanner assembly.
Guides users through common printer issues like power, motor, and readiness.
Procedure to restore printer settings to factory defaults.
Instructions for printing demo and configuration reports.
Explanation of printer status indicated by light patterns.
Information on causes of paper jams and how to clear them.
Step-by-step instructions for safely removing jammed paper.
Solutions for common print quality problems like blank pages or faded print.
Guides users on resolving issues with paper curling, skewing, or multi-feeds.
Provides diagnostic tests to identify malfunctions.
Procedure to interrupt printing mid-process for component inspection.
Test to verify the proper rotation of the photosensitive drum.
Instructions for checking high-voltage contacts for proper connection.
Introduces tools used for diagnosing repetitive print defects.
Explanation of how to use the ruler to identify faulty parts.
Provides an electrical schematic of the printer's circuitry.
Identifies the locations of solenoids, sensors, switches, and motors.
Lists web resources for ordering parts, software, and documentation.
Catalog of accessories like cables, print servers, and toner cloths.
Information regarding printer exchange programs and part numbers.
Exploded views and part numbers for external covers and panels.
Exploded views and part numbers for major internal assemblies.
An alphabetical listing of all parts with their part numbers and locations.
A list of parts organized by their part numbers.
To Next Page