Engine control unit (ECU) assembly
1 Remove the following assemblies.
● Right-side cover. See
Right-side cover on page 68.
● Left-side cover. See
Left-side cover on page 70.
● Top-cover assembly. See
Rear panel and top-cover assembly on page 70.
● Front cover. See
Front cover on page 75.
2 Disconnect the flat flexible (ribbon) cable (callout 1) from the formatter, which is on the right side of
the product.
1
Figure 5-28 Remove the ECU assembly (1 of 6)
ENWW Internal assemblies 85
To Next Page
Loading...