HP LaserJet 1022 - Model and Serial Numbers; Hardware Description; Firmware Description

Model and serial numbers
The model number and serial number are listed on an identification label located on the back of the
product.
The serial number contains information about the country/region of origin and the revision level,
production code, and production number of the product.
The label also contains power-rating and regulatory information.
HEWLETT-PACKARD
11311 CHINDEN BLVD.
BOISE, IDAHO 83714
USA
This product conforms with
CDRH radiation performance
standard 21 CFR chapter 1,
sub-chapter J.
Complies with Canadian EMC
Class B requirements.
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
>PET< SITE:FR1
Made in China
Fabricado en China
CNBR212347
CNBR212347
CNBR212347
CNBR212347
220- 240V ~AC
50/60 Hz, 2.5A (2,5A)
Numero reglementaire du modele
Regulatory Model Number BOISB-0405-00
é
é
é
Numero du produit
Product No. Q5912A
Apparaten skall
anslutas till jordat
natuttag.
Manufacturado
Manufactured:
April 16, 2005
CNBB123456
Nsmero de Serie
Serial No.
Figure 1-3 Model- and serial-number label
Hardware description
The HP LaserJet 1022 series printers provide ProRes technology for 1200 dpi resolution.
The product prints at 19 ppm for letter-size paper and 18 ppm for A4-size paper. With 1200 dpi printing,
the product has exceptional text and graphics print quality. The simple control panel and improved paper
handling make this product very easy to use.
The main input tray has a 250-sheet (75-g/m
2
[20-lb] media) capacity for continuous, multiple-page
printing. The priority input slot is used to manually feed single sheets of most recommended media. Both
the main input tray and the priority input slot are center-justified for all supported media sizes. The output
bin holds up to 100 sheets of 75-g/m
2
(20-lb) paper.
The product has a very fast first-page-out, at less than 8 seconds. The base memory contains 8 MB of
RAM and an embedded 133 MHz processor.
The print engine has an average duty cycle of 1,000 pages per month (7,000 peak) or 50,000 total pages
printed. The standard print-cartridge life is 2,000 pages, in accordance with ISO/IEC 19752.
NOTE Actual print cartridge life depends on specific usage.
Firmware description
The firmware in the product includes these features:
■ Host-based printing
■ PCL Level 5e
■ EconoMode functionality
ENWW Overview of product 5