Q1342-90910 External assemblies 27
Solenoid
1 Remove the following assemblies:
z Toner cartridge, media tray and formatter pod. See “Toner
cartridge” on page 15 through “Cable pod” on page 17.
z Left side, back, and right side covers. See “Left side cover” on
page 18 through “Right side cover” on page 24.
2 Unplug the brown solenoid wire connector (callout 1) from the
ECU and carefully unwind the solenoid harness from the harness
lance points (callout 2).
Figure 16. Disconnect the solenoid wire harness
2
2
2
1
To Next Page
Loading...