50 Chapter 2 - Removal and replacement Q1342-90910
Pickup assembly
1 Remove the following assemblies:
z Toner cartridge, media tray, and cable pod. See “Toner cartridge”
on page 15 through “Cable pod” on page 17.
z Left side, back, right side, and top covers. See “Left side cover”
on page 18 through “Top cover” on page 29.
z Front cover, toner cartridge door, and front guide. See “Front
cover” on page 32 through “Front guide” on page 36.
z Fuser assembly. See “Fuser assembly” on page 42.
z Right plate assembly. See “Right plate assembly” on page 48.
2 Remove the side pickup assembly mounting screw (callout 1).
Figure 39. Remove the pickup assembly mounting screw
11
To Next Page
Loading...