11
12
13
14
15
Figure 1-3. Back and side view
11 USB port
12
Parallel port (HP LaserJet 1015 printer only)
13
On/off switch
14
Power receptacle
15 Separation pad
Hardware description
The HP LaserJet 1010 product provides 600 x 600 dpi printing. The HP LaserJet 1012, and
1015 offer 600 x 600 x 2 dpi printing (effectively 1200 dot per inch (dpi) using HP REt
technology).
The product prints at 12 pages per minute (HP LaserJet 1010) or 15 ppm for letter-size paper
and 14 ppm for A4-size paper (HP LaserJet 1012 and HP LaserJet 1015). With 600 dpi
printing for the HP LaserJet 1010 printer and an effective 1200 dpi printing resolution for the
other models, the product has exceptional text and graphics print quality. The simple control
panel and improved paper handling make this product very easy to use.
The main input tray has a 150-sheet (20 lb paper) capacity for continuous, multiple-page
printing. The priority input tray is used for manual feeding single sheets of most
recommended media and will hold up to ten sheets of 20 lb paper. Both trays are center-
justified for all supported paper sizes. The output bin holds up to 125 sheets of 20 lb paper.
The product has a very fast first-page-out, at less than eight seconds. The base memory
contains 8 MB of RAM, and an embedded 133 MHz processor.
The print engine has an average duty cycle of 1,000 pages per month (7,000 peak). The
standard toner life is 2,000 pages with 5 percent toner coverage.
ENWW Overview of product 5
To Next Page
Loading...