Item 110-volt models 220-volt models
Power consumption (typical)
During printing 250 W (average) 250 W (average)
During standby 2 W (average) 2 W (average)
Power Save mode 2 W (average) 2 W (average)
Off mode 0 W (average) 0 W (average)
Heat output
During printing X BTU/hr X BTU/hr
Minimum recommended circuit
capacity
4.5 A 2.3 A
Note
Values subject to change. See http://www.hp.com/support/lj1010 for current information.
WARNING!
Power sources are not interchangeable.
Activity level Operator (<1m) Bystander (1m) Sound power
Active
L
pAm
56 dB (A) L
pAm
48 dB (A) L
WAd
6.1 Bels (A)
Idle
L
pAm
N/A dB (A)
(inaudible)
L
pAm
N/A dB (A)
(inaudible)
L
WAd
N/A Bels (A)
(inaudible)
Note
Values subject to change. See http://www.hp.com/support/lj1010 for current information.
During other operations, acoustic emissions may vary.
8 Chapter 1 Product Information ENWW