Note
You might be able to print on heavier paper if you do not fill the input tray to capacity and if
you use paper with a smoothness rating of 100 to 180 Sheffield.
Card stock construction
●
Smoothness: 135-157 g/m
2
(36-to 42-lb) card stock should have a smoothness rating of
100 to 180 Sheffield. 60-135 g/m
2
(16- to 36-lb) card stock should have a smoothness
rating of 100 to 250 Sheffield.
● Construction : Card stock should lie flat with less than 5 mm (0.2 in) of curl.
● Condition: Make sure that the card stock is not wrinkled, nicked, or otherwise damaged.
● Sizes: Only use card stock within the following size ranges:
● Minimum: 76 x 127 mm (3 x 5 in)
● Maximum: 216 x 356 mm (8.5 x 14 in)
Card stock guidelines
●
Set margins at least 2 mm (0.08 in) away from the edges.
ENWW Guidelines for using media 21
To Next Page
Loading...