Step 6 After the image is transferred, the media enters
the fuser assembly where heat from the fuser
and pressure from the pressure roller
permanently bond the toner image to media. The
paper delivery sensor (PS803) determines that
the media has successfully moved out of the
fusing area.
Step 7 The fuser assembly exit rollers deliver media to
the paper output bin face down.
Pick-up roller
Transfer
roller
Delivery roller
Priority input tray
Main input tray
Pressure roller
Fuser
SL1
Engine controller PCB
Formatter
M1
PS801
PS802
PS803
Separation
pad
PAPER DELIVERY DETECTION sigunal
(/POSNS)
TOP OF PAGE DETECTION signal (/PISNS)
PICK-UP SOLENOID DRIVE signal (CPUD)
MAIN MOTOR DRIVE signals
Photo-sensitive
drum
PS801: Top of page sensor
PS802: Paper width sensor
PS803: Paper delivery sensor
M1: Main motor
SL1: Pick-up solenoid
PAPER WIDTH DETECTION signal (/PWSNS)
Figure 4-6.
Printer paper path
ENWW Printer functions 45
To Next Page
Loading...