ENWW Changing the pickup roller 73
Changing the pickup roller
If the printer regularly mispicks (no media feeds through or more than one sheet feeds through),
you might need to change or clean the pickup roller. See Ordering supplies
to order a new pickup
roller.
CAUTION Failure to complete this procedure might damage the printer.
1 Unplug the power cord from the printer, and allow the printer to cool.
2 Open the print cartridge door, and remove the print cartridge.
3 Find the pickup roller.
4 Release the small, white tabs on either side of the pickup roller, and rotate the pickup roller
toward the front.
To Next Page
Loading...