HP LaserJet 1015 series

ENWW Specifications 81
Electrical specifications
1
Warning! Power requirements are based on the country/region where the printer is sold. Do not convert
operating voltages. Doing so might damage the printer and void the product warranty.
HP LaserJet 1010
Power requirements
● 110-127v (+/-10%), 50/60 Hz (+/-2)
or
● 220v-240v (+/-10%), 50/60 Hz (+/-2 Hz)
Power consumption
●
● During standby and PowerSave*: 2 Watts
* Instant on fuser technology
● Off: 0 watts
Minimum recommended circuit
capacity for typical product
● 3.5 amps at 115 volts
● 2.0 amps at 230 volts
HP LaserJet 1012
Power requirements
● 110-127v (+/-10%), 50/60 Hz (+/-2)
or
● 220v-240v (+/-10%), 50/60 Hz (+/-2 Hz)
Power consumption ●
● During standby and PowerSave*: 2 Watts
* Instant on fuser technology
● Off: 0 watts
Minimum recommended circuit
capacity for typical product
● 3.5 amps at 115 volts
● 2.0 amps at 230 volts
HP LaserJet 1015
Power requirements
● 110-127v (+/-10%), 50/60 Hz (+/-2)
or
● 220v-240v (+/-10%), 50/60 Hz (+/-2 Hz)
Power consumption
●
● During standby and PowerSave*: 2 Watts
* Instant on fuser technology
● Off: 0 watts
Minimum recommended circuit
capacity for typical product
● 3.5 amps at 115 volts
● 2.0 amps at 230 volts
Printer specifications (continued)
During printing (14 ppm): 250 watts (average)
During printing (14 ppm): 250 watts (average)
During printing (12 ppm): 250 watts (average)