5 Remove one screw (callout 1) from the back of the product.
2
Figure 5-12 Remove the rear panel and top-cover assembly (4 of 6)
6 The top-cover assembly and metal rear panel are interlocked with plastic tabs. Plastic tabs also
secure the metal rear panel at the bottom. Lift up the top cover assembly at the top and pull it back
slightly. Lift the rear panel up off the tabs on the bottom.
Figure 5-13 Remove the rear panel and top-cover assembly (5 of 6)
72 Chapter 5 Removal and replacement ENWW
To Next Page
Loading...