Paper Movement Overview
The paper feed system picks print media automatically from
Tray 1 or Tray 2 and delivers it to the image formation system at
precisely the right time. The system then feeds the media to the
fusing station, and delivers the finished product to the output
position, either the face-down output tray on top of the printer, or
through the face-up delivery slot at the rear of the printer. The
output path is user-selectable by opening the rear output tray.
Figure 7 shows the possible paper paths and locations of the
various solenoids, photosensors and rollers.
HP LaserJet 5P/5MP, 6P/6MP Printer Service Supplement
New Product Features
17
To Next Page
Loading...