HP LaserJet 6P

Removal and Replacement
Overview
The removal and replacement procedures for many HP LaserJet
5P/5MP, 6P/6MP printer Field Replaceable Units (FRUs) are
identical to the HP LaserJet 4L and 4P printers. This section
describes only those differences unique to the HP LaserJet 5P/5MP,
6P/6MP for removing:
• Power Door
• I/O Cover
• Left Side Cover
• Top Cover
• Tray 1 Pickup Assembly
• Formatter Board Assembly
• Fuser Assembly
• DC Controller Assembly
WARNING!
Unplug the power cord from the power outlet
before attempting to service the printer. If this
warning is not followed, severe injury may result.
Never operate or service the printer with the
protective cover removed from the
Laser/Scanner Assembly. The reflected beam,
although invisible, can damage your eyes.
CAUTION
The printer contains parts that are electrostatic
discharge (ESD) sensitive. Always service
printers at an ESD protected workstation.
HP LaserJet 5P/5MP, 6P/6MP Printer Service Supplement
Removal and Replacement
41