r. Click Apply.
The printer is ready for wireless use.
NOTE
The signal indicator in the top right corner of the computer screen will change to Your
Network Mode.
3. Setting up a print queue
a. Open Print Center or Printer Setup Utility. (Click the hard drive icon, select
Applications, click Utility, and then Print Center or Printer Setup Utility.)
b. Add the printer using Rendezvous.
NOTE
You can add a printer using Rendezvous only. AppleTalk and TCP/IP are not supported.
c. Print a test page using Text Edit to verify functionality of the printer. (To open the
application, click on the hard drive icon, select Applications, and then click on Text
Edit.)
ENWW Connect the printer to a wireless only network 23
English
To Next Page
Loading...