Need help?Do you have a question about the HP Laserjet,Color Laserjet 3600dn and is the answer not in the manual?
General| Print Resolution | 600 x 600 dpi |
|---|---|
| Maximum resolution | 600 x 600 dpi |
| Monthly Duty Cycle | 50, 000 pages |
| Connectivity | USB, Ethernet |
| Paper Capacity | 250 sheets |
| Standard input capacity | 250 sheets |
| Standard output capacity | 150 sheets |
| Internal memory | 64 MB |
| Processor frequency | 400 MHz |
| Duplex printing | Yes |
| Network ready | Yes |
| Memory | 64 MB |
| Processor | 400 MHz |
| Printer Type | Color Laser |
| Weight | 44.1 lb |
| Maximum Paper Size | A4 |
| Operating System Compatibility | Windows, Mac, Linux |
Explains how the printer connects to an IEEE 802.3 10/100Base-TX network using RJ-45 connectors.
Details how to identify the product model number and firmware version of the print server.
Lists supported network protocols and common printing environments that use them.
Focuses on SNMP (IP) for device management and information retrieval.
A software module for quick and easy printer installation on a TCP/IP network.
An enterprise management tool for remote installation, configuration, and management of network printers.
Covers obtaining TCP/IP configuration via server-based methods or manual tools.
Explains default IP address assignment when network configuration fails or is unavailable.
Details automatic configuration using BOOTP and TFTP protocols for network operation.
Explains how DHCP automatically configures IP parameters for the print server.
Describes configuring the print server using the Reverse Address Resolution Protocol on UNIX/Linux.
Explains how to configure an IP address using ARP and ping commands from a supported system.
Provides instructions for configuring the print server parameters using Telnet.
Details how to set IP parameters on HP Jetdirect print servers via a web browser.
Describes accessing a configuration menu from the printer's control panel for basic network parameters.
Guides on reconfiguring the print server when moving it to a different network.
Outlines necessary compatible web browsers and exceptions for accessing the embedded web server.
Specifies the recommended HP Web Jetadmin version for operation with the embedded web server.
Steps to access and use the embedded web server after IP address establishment.
Displays general printer status, model, firmware, and network addresses.
Provides access to HP Jetdirect network configuration parameters and status for TCP/IP and SNMP.
Explains how to control access to configuration parameters using various security features.
Procedures to reset all HP Jetdirect print server parameters to their factory default values.
Steps to disable the Jetdirect embedded network interface for fault isolation.
A flowchart to diagnose and correct printer, print server, and network-related problems.
Explains status fields and error codes displayed on the configuration page for the print server.
Illustrates the typical format of a Jetdirect configuration page and its contents.
Explains how data is broken into packets and routed across networks using IP addresses.
Describes TCP's reliable, connection-oriented service for guaranteed data delivery.
Explains UDP's fast, connectionless service without reliability guarantees for discovery broadcasts.
Details the structure, network, and host portions of IP addresses.
Covers various methods to configure TCP/IP parameters like IP address, subnet mask, and gateway.
Explains how subnets partition networks for better performance and address space utilization.
Describes gateways (routers) used to connect different networks and subnets.
Provides descriptions for menu items and options available on the printer's control panel.
Defines Line Printer Daemon (LPD) and its associated programs for line-printer spooling.
Lists requirements for LPD printing, including operating system, access, and hardware address.
Outlines the necessary steps to configure the HP Jetdirect print server for LPD printing.
To Next Page