Do you have a question about the HP Laserjet,Color Laserjet 5500 and is the answer not in the manual?
Print Technology | Laser |
---|---|
Print Resolution | 600 x 600 dpi |
Paper Handling | 250-sheet input tray |
Connectivity | USB, Parallel |
Media Sizes Supported | Letter, Legal, Executive, Envelopes |
Network Ready | Optional |
Supported Media Types | transparencies, labels, envelopes |
Operating Systems Supported | Windows, Mac OS |
Base model with 96 MB SDRAM.
Includes 5500 features plus HP Jetdirect 615N network card.
Includes 5500n features plus automatic 2-sided printing.
Includes 5500dn features, additional feeder, stand, 160 MB SDRAM.
Includes 5500dtn features, third feeder, hard disk.
Choose sturdy, well-ventilated spot; avoid sunlight/humidity changes.
Cut tape, remove loops; check package contents.
Remove, position, align, and secure stand and feeders.
Four people needed to lift and move printer; disconnect power if already set up.
Use caution when stacking; secure units with screws.
Plug in power cord and turn printer on.
Use buttons to scroll, select, go back, and exit menus.
Select preferred language from control panel display options.
Open top and front covers using side handles to access cartridges.
Pull down transfer unit; remove cartridge from bag and distribute toner.
Remove orange shipping tape/locks and internal sealing tape from cartridge.
Insert cartridges by color; close transfer unit using green handles.
Print page to check functionality; consult guide if page fails to print.
Connect network cable to RJ-45 port and the network.
Connect printer to network via a network print server.
Connect multiple computers to printer using parallel cables.
Run setup from CD-ROM on Windows PC; follow on-screen prompts.
Run installer or select printer from Chooser on Macintosh.
Set drivers on computers to indicate paper feeder installation.
Load up to 500 sheets of 75 g/m² paper face-up into feeder trays.
Insert loaded trays into the printer and the 500-sheet paper feeder.