Networking Tab
The Networking tab provides access to HP Jetdirect network configuration parameters and status.
The menu items in the left margin are listed below and provide access to network configuration and
status pages.
■ CONFIGURATION
■
Network Settings
■
Other Settings
■
Privacy Settings
■
Select Language
■ SECURITY
■
Security: Settings
■
Authorization
■
Mgmt. Protocols
■ DIAGNOSTICS
■
Network Statistics
■
Protocol Info
■
Configuration Page
Sending Product Information to HP
The first time that you access the Networking tab, you will be prompted whether to allow sending
product information to HP. Product identification and usage data collected by HP will be used to
improve product features and services. Personal data is not collected in accordance with HP privacy
policies. See
Hewlett-Packard Online Privacy Statement.
You can choose to enable or disable this feature at any time using the Privacy Settings page under
the Networking tab.
Network Settings
The Network Settings pages allow you to set or change configuration parameters for TCP/IP and
SNMP protocols. To assign a parameter setting, enter the desired value and click Apply.
TCP/IP
The TCP/IP page provides configuration parameters summarized in Table 4-2 TCP/IP Settings.
Table 4-2 TCP/IP Settings
Item Description
IP Configuration Method Selects the method that the HP Jetdirect print server will use for its IP configuration
parameters: BOOTP (default), DHCP, Manual, or Auto IP.
48 Chapter 4 Using the Embedded Web Server ENWW
To Next Page
Loading...