2 Enter the IP address of the print server as the URL.
Figure 4-3 Entering the IP Address
Standard HTTP is used to access the embedded Web server.
3 An embedded Web server page will be displayed.
Operating Notes
■ If you enter or change a configuration parameter value, click Apply to enable your change, or
click Cancel to erase your change.
■ Changes to the IP address will close the connection to the embedded Web server. To re-
establish a connection, use the new IP address.
CAUTION Changes to the IP address on the HP Jetdirect print server may result in
printing failures for clients that have been configured to print using the previous IP address.
Home Tab
The Home tab will display the HP Jetdirect home page if a Web server in the attached device cannot
be accessed or does not exist. The HP Jetdirect home page displays a generic printer graphic to
represent the attached device. The HP Jetdirect print server's product model, firmware version, and
network addresses are displayed along with any device information that can be retrieved.
Table 4-1
HP Jetdirect Home Page Items provides a summary of the items displayed on the HP Jetdirect home
page.
Table 4-1 HP Jetdirect Home Page Items
Item Description
Networking tab Provides access to network configuration, security, and diagnostic parameters. For
more information, see
Networking Tab.
Device Info Identifies the printer (such as the model name).
Other information that can be retrieved from the printer will also be displayed (such as
Page Count, or Control Panel status) if the information can be retrieved.
Select Language Appears if the HP Jetdirect Web pages support multiple languages. Supported
languages may also be selected through language preference settings in your browser.
46 Chapter 4 Using the Embedded Web Server ENWW
To Next Page
Loading...