●
Feed or place labels in the trays with the top, short edge in first and the side to be printed on facing
down for Tray 1 and the side to be printed on facing up for Tray 2. For Tray 1, make sure that the
media is inserted far enough into the printer for the paper feed mechanism to grab the media.
●
Select Labels as the Type in the Print dialog box or the printer driver.
●
If a sheet of labels jams in the printer, see
Clearing jams.
Transparencies
When printing on transparencies, use the following guidelines:
CAUTION To avoid damaging the printer, use only transparencies that are recommended for
laser printers.
ENWW Printing on special media 31
To Next Page
Loading...
