Print Task Quick Sets
Use the Print Task Quick Sets control to store the current combination of driver settings that appear
on all other Properties driver tabs. Print Task Quick Sets are either preset (by the administrator) or
user-defined printing specifications, such as media size and pages per sheet. For more information, see
Paper/Quality tab features.
Document Options
The Document Options group box contains the following controls:
●
Correct order for rear bin
●
Print on Both Sides (Manually)
●
Flip Pages Up
●
Booklet layout is
●
Pages per Sheet
●
Print Page Borders
●
Page Order is
Correct order for rear bin
NOTE The HP Color LaserJet 3600 does not support this feature. The printing-system software
does support this feature in other products, but when this feature is selected for the
HP Color LaserJet 3600, the control is ignored.
The default setting for the Correct order for rear bin option is off (not selected).
Use this feature to order your pages correctly for the output bin.
Print on Both Sides (Manually)
The default setting for the Print on Both Sides (Manually) option is off (not selected). Select the Print
on Both Sides (Manually) check box to print on the second side of the media for a print job.
Flip Pages Up
The Flip Pages Up check box, which is available only when Print on Both Sides is selected, is used
to specify the duplex-binding option. By default, the Flip Pages Up check box is not available. The
following table demonstrates the results of selecting this box, depending on the media orientation that
is selected on the Basics tab.
Table 3-5 Page orientation
Orientation (Basics tab) Flip Pages Up selected Flip Pages Up not selected
Portrait Short-edge binding Long-edge binding
Landscape Long-edge binding Short-edge binding
ENWW Finishing tab features 85
HP Traditional host-
based driver for Windows
To Next Page
Loading...