The Watermark Details dialog box contains the following controls:
NOTE This section also contains information about default watermark settings.
●
Current Watermarks
●
Watermark Message
●
Message Angle
●
Options
●
Document preview image
●
Font Attributes
●
Default watermark settings
Current Watermarks
The Current Watermarks group box contains a list of available watermarks, both predefined
watermarks that are available in the driver and any new watermarks that you have created.
To create a new watermark, click New. The new watermark appears in the Current Watermarks list
and in the Watermark Message edit box as Untitled until you name it.
To name the new watermark, type the selected watermark text in the Watermark Message edit box.
To delete a watermark, select the watermark in the Current Watermarks list and click Delete.
NOTE You can have no more that 30 watermarks in the Current Watermarks list at one time.
When you reach the limit of 30 watermarks, the New button is disabled, and a Bubble Help
message appears that explains why the button is disabled and how to make it available.
To edit an existing watermark, select the watermark in the Current Watermarks list. If you change the
Watermark Message for that watermark, you are, in effect, creating a new watermark.
Watermark Message
The Watermark Message is also the name that identifies the watermark in the Current Watermarks
list, except when more than one watermark has the same message. For example, you might want
several different watermarks with the message DRAFT, each in a different font or size. When this occurs,
the string is appended with a space, a pound sign, and a number (for example, Draft #2). When a number
is added, the number two is used first, but if the resulting name is also in the list, then the number
increases until the name is unique.
94 Chapter 3 HP Traditional host-based driver for Windows ENWW
HP Traditional host-
based driver for Windows
To Next Page
Loading...