Size is
The Size is: setting is a drop-down menu that lists all of the supported media sizes.
When you move the mouse over the dimensions label, the mouse cursor changes from an arrow to a
gloved hand. Click the dimensions label to toggle between English and metric units.
Because media-size settings in most software programs override driver settings, it is generally best to
use the driver to set media size only when you are printing from software programs that do not include
a media-size setting, such as NotePad, or when you are producing a book or a booklet that does not
require different media sizes.
NOTE Certain software programs can override the size command and specify different media
sizes within a single document.
When you change the print-driver setting to a media size that is not currently loaded in the product,
a control-panel message appears that prompts you to load the media size or choose another
tray.
For information about media sizes, see the Media attributes section of this manual.
When the Use Different Paper/Covers check box is selected and different options are configured, the
Size is:, Source is:, and Type is: menus change, offering a variety of options. For more information,
see the
Use Different Paper/Covers section in this chapter of the manual.
Custom Paper Size
The Custom Paper Size dialog box appears when you click the Custom... button on the Paper/
Quality tab. The following figure shows the initial appearance of the Custom Paper Size dialog box.
Figure 4-5 Custom Paper Size dialog box
Name
Use the Name text box to type a new name for a custom media size.
ENWW Paper/Quality tab features 121
HP JetReady 4.2 host-
based driver for Windows
To Next Page
Loading...