Tray Dimensions Minimum Maximum
Duplexing unit Width
148.0 mm (5.83 inches) 215.9 mm (8.5 inches)
Height 210.0 mm (8.26 inches) 355.6 mm (14.0 inches)
Source Is
The Source is: setting specifies the source tray to use for printing a document. The list of source trays
depends on the printer accessories. Any optional source trays that are installed through the Device
Settings tab also appear here.
The Source is: drop-down menu can contain the following options, depending on what has been
installed on the product:
●
Automatically select
●
Printer Auto Select
●
Manual Feed in Tray 1
●
Tray 1 (500-sheet multipurpose tray)
●
Tray 2 (500-sheet tray)
●
Tray 3 (500-sheet tray)
The default setting is Automatically Select. When this setting is selected, the HP Color LaserJet 3600
uses the source tray that supports the media size that you have selected. If you select a source tray
other than Automatically select, make sure that the correct media size is loaded in the source tray.
For information about media sources, see the
Media attributes section of this manual.
Type is
The Type is: drop-down menu shows all of the media types that the HP Color LaserJet 3600 supports.
When you use the default setting, Unspecified, the printer uses the default media type, which is usually
Plain.
No mechanism exists for manually adding custom media types through the driver. Custom types can
be added only by using the bidirectional communication mechanism, so they must already exist in the
product when the bidirectional query occurs. If bidirectional communication is enabled, then the
information an updated list of media types is returned. If bidirectional communication is not enabled,
then the driver looks for custom media types that have been saved from a previous bidirectional
communication query, and uses those. Otherwise, no custom media types are available through the
driver.
The following standard types appear in the lists:
●
Unspecified
●
Plain
●
Preprinted
●
Letterhead
●
Transparency
Table 4-2 PCL 6 custom media sizes (continued)
ENWW Paper/Quality tab features 123
HP JetReady 4.2 host-
based driver for Windows