Figure 4-17 Color Settings dialog box
The Color Settings dialog box contains the Generalgroup box.
General
Use the General setting group to control Edge Control settings for all color printing.
Edge Control determines how edges are rendered. Edge Control consists of three components:
Adaptive Halftoning, Trapping, and Color Resolution Enhancement technology (C-REt). Adaptive
Halftoning increases the edge sharpness. Trapping reduces the effect of color plane misregistration by
slightly overlapping the edges of adjacent objects. C-REt increases the apparent resolution by placing
each dot for the smoothest edges.
The Edge Control option offers four settings:
●
Off. The Off setting turns Trapping, Adaptive Halftoning, and C-REt to Off.
●
Light. The Light setting provides minimal trapping. Adaptive Halftoning is set to On and C-REt is
set to On.
●
Normal. The Normal setting provides the default trapping settings. Adaptive Halftoning is set to
On, and C-REt is set to On.
●
Maximum. The Maximum setting provides the most trapping. Adaptive Halftoning is set to On,
and C-REt is set to On.
Document preview image
The document preview image is a line-drawn image of a page that represents graphics and text. The
document preview image is always oriented so that the contents of the page are right-side-up. The
ENWW Color tab features 147
HP JetReady 4.2 host-
based driver for Windows
To Next Page
Loading...