Select the printer you want to install and click Next. The Confirm Network Settings dialog box opens
(see
Figure 5-13 Confirm Network Settings dialog box).
If the printer you want to install is not listed and you know its TCP/IP address, click Next. The Confirm
Network Settings dialog box opens. See
Figure 5-13 Confirm Network Settings dialog box and follow
the instructions for changing the TCP/IP address.
If a single printer is found, the Printer Found dialog box appears, with a list of matching products that
have been found on the network. The Printer Found dialog box is shown in the following figure.
Figure 5-12 Printer Found dialog box
If you click No, I want to install a different printer and then click Next, the Check Printer
Connection dialog box opens, advising you to make sure the cable is properly connected, and giving
you the option of searching again for a network printer or specifying a printer by address (see
Figure
5-15 Check Printer Connection dialog box).
If you select Yes, install this printer and then click Next, the Confirm Network Settings dialog box
opens, as shown in the following figure.
170 Chapter 5 Installing Windows printing-system components ENWW
Installation in Windows
To Next Page
Loading...