Figure 5-40 Port Creation Options dialog box
Click No, do no create the port (the printer will not be installed) if you do not want to create a port.
Click Yes, create the port and click Next to open the Drivers dialog box.
If the printer cannot be found, type the printer hardware address in the Hardware Address field and
click Next.
Figure 5-41 Driversdialog box
Any combination of features can be selected for the installer, and none depends on any other selection.
It is possible to create a custom installer that installs features without including a print driver. Select the
drivers you want to install (or select none of them if you do are not installing a driver).
ENWW Installation instructions 191
Installation in Windows
To Next Page
Loading...