On the Additional Software dialog box, click Next to open the Custom Installer Location dialog box,
which is shown in the following figure.
Figure 5-47 Custom Installer Location dialog box
Use the Location: text field to type a description of the physical location of the printer. The field is large,
but is limited as to the number of characters that it can accommodate.
To change the physical location of the printer, click Browse…, navigate to the folder that you want, and
click OK to return to the Custom Installer Location dialog box.
Click Next to open the Ready to Create Installer dialog box, which is shown in the following figure.
Figure 5-48 Ready to Create Installer dialog box
ENWW Installation instructions 195
Installation in Windows
To Next Page
Loading...