2. Click HP Easy Printer Care Software. The HP Easy Printer Care screen appears.
3. Click OK to proceed with the installation.
When you install the HP Color LaserJet 3600 printer over a direct USB or parallel connection by using
the printing-system software CD, HP Easy Printer Care is automatically installed when using the default
selections. Using this method, HP Easy Printer Care also discovers any HP printers that have been
installed on the computer over the network by selecting Find Other Printers in the HP Easy Printer
Care software.
When you install the HP Color LaserJet 3600 printer over a direct USB or parallel connection that does
not use a DOT4 port (for instance, by using the Add Printer Wizard), HP Easy Printer Care will not
discover the printer. For USB or parallel connections, you must install the printer driver using the installer
in order to the required DOT4 port installed.
When you install the HP Color LaserJet 3600 printer over a transmission control protocol/internet
protocol (TCP/IP) network connection by using the printing-system software CD, HP Easy Printer Care
is an option for a Custom Installation. It is not an option for a Basic Installation or a Full Installation over
a network.
HP Easy Printer Care is not supported over Novell Netware (IPX/SPX) network connections.
Access
To gain access to HP Easy Printer Care, follow these steps:
1. Click Start.
2. Select All Programs.
3. Select Hewlett-Packard.
4. Select HP Easy Printer Care.
5. Click Start HP Easy Printer Care. The Easy Printer Care screen appears.
ENWW HP Easy Printer Care 33
Software description
To Next Page
Loading...