HP Printer Utility for Macintosh
The HP Printer Utility is a software program that gives you access to your printer in Mac OS X.
The HP Printer Utility is available only in Mac OS X V10.1.5 and later. The HP Printer Utility does not
work when it is installed using the AppleTalk protocol; it requires IP, Bonjour or Rendezvous.
The following topics are discussed in this section:
●
Access to the HP Printer Utility
●
Supplies Status
●
Device Information
●
HP Support
●
File Upload
●
Update Firmware
●
Duplex mode
●
Trays Configuration
●
Lock Resources
●
Network Settings
●
Rendezvous Setting
●
Supplies Management
●
Additional Settings
Access to the HP Printer Utility
In Mac OS X V10.3, follow these steps to gain access to the HP Printer Utility:
1. Open the Finder.
2. Find and double-click Printers. The Select Printer screen appears.
In Mac OS X V10.4, follow these steps to gain access to the HP Printer Utility:
1. Click Go.
2. Click Utilities.
3. Double-click HP Printer Selector. The Select Printer screen appears.
48 Chapter 2 Software description ENWW
Software description
To Next Page
Loading...