Select your connection type (USB, TCP/IP, or AppleTalk). The product name appears under Device
Name.
On the Connection Type screen, click Add. The Select Printer screen appears, showing printer
information.
You can also select the printer and click Launch Utility to open the HP Printer Utility directly.
Figure 2-17 Select Printer screen — printer selected
On the Select Printer screen, click Settings... to open the Device Status screen on the HP Embedded
Web Server (HP EWS). For more information about the HP EWS, see
HP Embedded Web Server in
this guide.
To open the HP Printer Utility, select your printer and click Launch Utility.
If the HP Printer Utility software detects a condition that might need attention, the Printer Status screen
appears.
50 Chapter 2 Software description ENWW
Software description
To Next Page
Loading...